Wow, been a while!

It has been quite a while since I updated this series or been out to the woods. A new addition to the family in the form of a little girl will do that to a person. I had to make time to get out and check on the pond and property. A few items on the to do list had to be taken care of also. The pond was very high when I first pulled in the gate; so a walk around was the first order of business. I shortly found out it was to be a slosh around. Water was pouring into the pond with only 1/2" of rain for the month. The ground was visibly saturated with lots of ponding everywhere a low spot occured. In the back of the property, the culvert leading into the pond had water flowing over it. The culvert for the pond dam end letting the spillway lead into the creek was practically washed out. A large pond has formed where the overflow pipe emptied behind the dam. Drainage needs to be deepened for it as the picture shows.l The standing water there explained the stressed trees in that area. Lots of dirt work is going to be needed in the future, probably to tear out the culverts and add small bridges instead.

I was able to work on realeasing a small area of saplings near the sawmill area. There was a funky post oak and some gnarly, bent cedar elms over topping them. I was able to take down most of them, but time constraints meant I had to leave 2-3 for the next time. I also cut some problem trees that were to close to more desireable trees on the way back. The wet ground prevented me from picking up any of the wood; so I stacked it neatly on the side of the path. I hope to accomplish more the next time I am, barring anymore water damage. I need to finish releasing rhw incomplete area and cutting that wood into firewood. I then need to mark and cut any other bad form trees leading up to that area. I have the property blocked out into 5 areas, and I never really worked on area 1 last year. Twice the work, but twice the fun!

Rains and wood

I am really glad I made it out. Previously, I had my wood stack float 10 feet closer to the pond during a big rain event. It has rained 2.5 inches in the last few days, and I am glad I picked up everything. A large portion of the wood was the dead cedar I milled. I added a picture of some to the left. It is some beautiful wood. I also picked up some 6/4 cedar elm lumber and the osage stump I milled. I should be set on porject wood for a while, and need to rig up a router jig to plane the osage lumber becuase fo the size and crazy grain. You should check back in the future to see the final results. The cedar elm has checks in the pith, but I expected that from the small, twisted trees I cut. I believe next on the agenda for the woodlot is to set up the mills wood deck and start collecting up another group of logs starting with rot and bug resistant cedar. If I can get the deck set up, then all of the logs can be kept off the ground and in relatively good condition. It will allow me to log for a while and mill them all at once. Stacking the lumber was a pain when I was doing a log here and there where I cut the movement prone cedar elm well after the eastern red cedar. The cedar stacked on the cedar elm would have weighted it down some, but it is a pain to break up a wood stack every time you mill. I hope to mill a decent stack all at once in the future. I still have quite a few dead cedars to go, some more cedar elm culls, and may cut some stagnant post oaks to release some saplings near the sawmill. The ERC is going to be milled into 8/4 lumber for table legs and a certain style of cabinet I want to make. The cedar elm will become more 6/4 that I resaw after it moves during drying into 1/2" stock. The oak will probably just become yard timbers for a raised bed garden at home, and that means I don't need to dry it. Hope to get out soon, but it may be a while with the kiddo taking up my time!

Woo Wee! Made it out!

I made it out to the property for a little while at least. I did not accomlish much on the forestry end of things other than some pics for a buddy who's business is Texas Timbers. He wants some cedar elm badly to turn into flooring. The photo shows a cedar elm twig with leaves using my hand for size reference. I remember when I first spoke to him on the phone when he was looking for new woodlots to source wood from. He had never heard of cedar elm and wanted nothing to do with it. Now that he has seen what I have done, he has done a 180 on the topic. I am keeping mine for myself, and he has his own sources. I was able to do a little mowing, caught some fish for dinner and through back a 4lbs largemouth, and made sure everything was alright. I made it home with all of the wood I had cut and it appears to be nice and stright with little problems. One cedar elm board has some bug activity, but I think it will pass like my earlier experiments did. Next on the agenda is make some items with all of this wood for the business. Hopefully I will get enough stock built up to begin doing the local Third Monday Trade Days!

Stuck at home, so testing cedar elm

Well, I am stuck at home with the new baby! I guess if there is any reason to stay away from the woods, it is our new little girl. Another good thing to come from staying home is I get to use some of the wood harvested and milled from the property. Here is a pic of a box out of cedar elm I milled from a cull tree that was crooked and skinny. Nobody could tell me anything about the wood except that it must be similar to other elms. Duh, but how close? Well, this is one tough, pretty wood. The interlocking grain makes it stringy, and it is very tough. Sharp tools are a must with this wood to prevent burning. It has a very light sapwood and a medium brown heart wood, and there is a very dramatic break between the two. The sap tears out much more than the heart, and quartersawn rays are prone. It does show a very nice rayfleck in the quartersawn grain. The interlocking grain in the sapwood also shows a very interesting zigzag pattern that can make the planesawn faces nice. The hardness made it dificult for me to remove swirl marks from some coarse grit sanding. I think I have found a new favorite wood as long as I can get past the burning issue. I hope to be out in the woods working soon, but until then I have some fruits of my labors to play with.

BMP's and a trail through the woods

BMP's, or best management practices, are a landowner's friend. They keep a property looking good, prevent future damage, and help keep the neighbors happy. Texas does not require following their BMP guidlines. It is voluntary, and you must make sure they are followed on your property when you have it logged. Here is a link to the Texs BMP's: http://txforestservice.tamu.edu/uploadedfiles/sustainable/bmp/bmpbookindd.pdf .
A trail through the woods is always important if you plan on enjoying them close up. The BMP guidelines can be helpful in planning the trail route and it's construction. If you plan it right, you can even convert logging roads into trails for future use. I have an old logging road running around our property in the shape of a C connecting the two ends of the dam. BMP's were not followed when making this road. A few places need runoff control. The stream crossings are also not in very good shape, but are only an aesthetic and vehicle access issue. I am going to start with the runoff problem since it is the cheapest problem. Wheelchair access for my wife creates an extra dimension to the trail issue. We will be making the trail as smooth as possible with water bars created with trash trees to direct runoff to prevent erosion of the smooth path. Erosion control is also important when you consider all of our runoff goes into the pond. Runoff affects water clarity, condition, and content. It is much easier to control runoff on your property athn to treat a pond for turbidity and other water problems. A properly designed trail should be able to accomodate us and occassional vehicle traffic while limiting harmful impact to the woodlot and wildlife.

Taking a forest walk

We went on vacation in Arkansas and went on some nice drives along the Buffalo National River. One spot that was accessible for my wife to get out was near the Henry R. Koen Experimental Forest. We had a picnic and enjoyed the view of the river and forest. Access to the Koen Interpretive Trail in the experimental forest can be found along the Erbie Loop drive on the following website: http://www.nps.gov/archive/buff/autotour.htm . It is a short and easy trail with a lot of labeled trees. If you ever wondered how they experiment on a forest, here is your chance. It is also worth a drive for the views and the old farmsteads along the way. A beautiful area with some great views of rugged hills covered with forest and, of course, the Buffalo river.
Petit Jean State Park has another wheelchair accessible trail that gave me great ideas for our property. It is a boardwalk to an overlook of Cedar Falls. It was easy to walk on and for her to roll on. I believe it would be a great way to make some of the seasonally flooded areas accessible to everyone. A short raised boardwalk over the water and around some of the pond would be great for seeing some of the wildlife. A boardwalk is a lot of work and needs a large amount of wood, but it may be the best option for the property for making it accessible.

A quick June update

Well, it has been busy around the house and tough to get out to the property. I planned on releasing the willow oaks and cutting up the rest of the cedar on the sawmill, but mother nature threw a wrench in that idea. The little garden tractor's engine filed up with water from the big rain event we had a few weeks back. I am not sure if the water came up that high or it blew in somehow. However it got in, it took awhile to change the oil/water at the back of the property where it almost seized up. Now it burns a little oil and I am sure its' days are numbered. I started looking at what to use as a woodland tractor. There are lots of pros and cons for skid steers and compact utility tractors. Once I have tallied up all of the responses, I will post all of them here to make a decision. I may not have the money for the best solution, but I will have it stored on here for the future. I also have very few of the saplings surviving in the high water. Once it goes down in the fall, I will make a head count of the survivors.