Clearing a piece of overgrown pond shore

I would have loved to have spent a day on the tractor, but the job at hand took priority. A skid steer with a mulching head would have been the perfect tool if I had the cash. Free manual labor had to do this time. The original pond must have been rectangular with a dam around all 4 sides. On the north side, it is mostly removed with a big peninsula on the west as pictured below and a smaller one on the east. The smaller one would make a nice secluded campsite. We need room for a tent pad, fire ring, and sitting area. It is relatively flat and overgrown with small trees and lots of thorny vines. You can see how dense it is on the edges of the photo. The brush saw would not stay running for long, but once I started taking the chainsaw to things I realized most was to large for my brush saw anyways. I had about 3 1/2 hours to do some clearing after a quick walk around the place to check everything. One more day should do it on the clearing and then I can take a sharp mattock to any offending stubs and mow the vines. We had a delimna deciding what to do with the brush: burn or chip. Burning is easy and can help clear those vines when done right on top of the clearing. Chipping gives us mulch we can use on paths and the tent camping site. Once all of the cutting is finished, we are going to rent a chipper and make mulch. We might as well make sure there is a full days chipping if we have to rent one for a day. I plan on cutting the larger trunks into firewood for use at home and here. I have a few other topics of interest that warrant a seperate post that I will post in the next few days. They will be about beaver that is still there and starting an orchard in some clear areas at the north end of the property.

2 trips in 2 weeks, amazing!

I made it out 2 times in the past 2 weeks. Hope to make it out again next week to hunt and possibly do a little milling. It sure is looking good out there. Cut some wood for the mill, fireplace, and to deer hunt. I scoped out a concrete pad I am sizing up to build a pavilion on for picnics. The trees were cut for either posts or picnic table for the pavilion. A beaver has been out there but not sure if it is still around. A lot of dirt has been pushed up around the overflow pipe on the dam and I found the den. I checked on the trees I have planted. The bald cypress are doing well with some around 5 feet tall. The cottonwood has been hit by animals, and all that is left is little mud puddles in a neat line where they were planted. The mayhaws also look to have drowned in the high water. I will need to get a closer look with waders or rubber boots to tell them apart from the brushy plants. I will get another post up soon with pics and better details.

All right, now we are getting somewhere! I took delivery of the Logrite Junior arch recently with the extension handle. It is a well made piece of equipment with everything lining up properly and nice, contnuous, smooth welds. Even the bolts were good quality. The arch can hold up to a 16" diameter log in the tongs and 16' in length because of the extension. I am not sure I would want to pull its full capacity by hand. I can now haul all my firewood as practically tree length material to my firewood pile. It will also hold a log above the ground for bucking into firewood lengths. No more hitting dirt and dulling the chain. I will also start hauling larger, heavier logs to the mill with it. The little lawn tractor was having a hard time dragging much of a log, even with a piece of old barrel as a skidding cone. Cedar was pretty much the limit for it, and short or small diameter pieces at that. I hope to get some use out of it this spring as a lot of cleaning needs to be done and some of those trees will make decent wood for the sawmill. I have been rereading some of my books in preparation for marking and cutting more junk trees to make room for the good ones to grow. I will have a report on how it worked out next time.

The Good, the Bad, and the Ugly

I will go with the bad first. The state forester came out, looked around for 15 minutes, and said manage for wildlife. I was disappointed that the only two aspects he considers important are pine production and wildlife. The main trees I have, oak and hickory, are good for wildlife and hardwood timber. He said that hardwood takes to long so don't mess with it. I figured I would get a response like this, but not one devoid of any help at all. The good news is the folks over at http://www.forestryforum.com/ have been very helpful with their expertise. I have enough book learning to get a plan in place, and the forum members can help me fill in the gaps and problem areas. The ugly comes in two parts. First is a couple of ugly areas of poor form elm overtopping some nice oak and hickory saplings. The forum members helped me a lot by informing me that it would be a good idea to cut out the poorly formed trees and release these seedlings. The second is the ugly bois d'arc trees I found pushed over may not be good for sawing. I cut up the first on into firewood because of a monster heart check 6" wide splitting the trunk. Combined with the regular exterior checking, the log was toast. I have only trimmed off some of the limbs of the second larger one, but it appears it will be the same. They are going to make over a cord of firewood, so we will have a couple years supply of rot proof firewood on hand.