Rains and wood

I am really glad I made it out. Previously, I had my wood stack float 10 feet closer to the pond during a big rain event. It has rained 2.5 inches in the last few days, and I am glad I picked up everything. A large portion of the wood was the dead cedar I milled. I added a picture of some to the left. It is some beautiful wood. I also picked up some 6/4 cedar elm lumber and the osage stump I milled. I should be set on porject wood for a while, and need to rig up a router jig to plane the osage lumber becuase fo the size and crazy grain. You should check back in the future to see the final results. The cedar elm has checks in the pith, but I expected that from the small, twisted trees I cut. I believe next on the agenda for the woodlot is to set up the mills wood deck and start collecting up another group of logs starting with rot and bug resistant cedar. If I can get the deck set up, then all of the logs can be kept off the ground and in relatively good condition. It will allow me to log for a while and mill them all at once. Stacking the lumber was a pain when I was doing a log here and there where I cut the movement prone cedar elm well after the eastern red cedar. The cedar stacked on the cedar elm would have weighted it down some, but it is a pain to break up a wood stack every time you mill. I hope to mill a decent stack all at once in the future. I still have quite a few dead cedars to go, some more cedar elm culls, and may cut some stagnant post oaks to release some saplings near the sawmill. The ERC is going to be milled into 8/4 lumber for table legs and a certain style of cabinet I want to make. The cedar elm will become more 6/4 that I resaw after it moves during drying into 1/2" stock. The oak will probably just become yard timbers for a raised bed garden at home, and that means I don't need to dry it. Hope to get out soon, but it may be a while with the kiddo taking up my time!