Sawmill is here!

Well, the sawmill is finally home and set up. We had a problem when picking it up with a faulty drive belt. The owner of Mister Sawmill fixed it. I am really glad I asked for a demo run. The drive pully was out of alignment, and that would have been a pain to fix in the field. I ran a test log after getting it to the property and it works well. There is definitely going to be a learning curve with this tool. I went out this past weekend and cleared out some busted, half dead cedar big enough to mill. They cut into ~100 board feet of nice lumber, and one made an especially nice set of 8/4 bookmatched boards for bench legs. I also had my first busted band right at the end of the last cut. Now I need to figure out why. I did not bring a piece home, but you can look at where the cracks start and see chat it might be. Hopefully they don't start at the back since that means the guides are not set up right. Cracks on the front mean something is wrong with feed rate, lube, dull blade, etc. I hope it was just me pushing to hard, and I already know I was not using enough lube. There are still a few more dead cedars to mill and a 8' tall 12" DBH hickory near the mill. I have been wondering what boke their tops out. I get to start fetching logs from farther off with the lawn tractor after that. It pulled a 5'x8' skid pretty well. Hopefully it will pull a log with a skidding cone.